Specialist Suppliers to the Blast Cleaning and Protective Coating Industry

Testimonials

Here are some testimonials from our clients.


Customer Testimonial on SpeedBlast Garnet Abrasive

Posted on 9/11/2013 at 7:30am

Gavin,

I would like to recommend the use of Blast-One Australian Garnet for future project that entail sandblasting. A contractor tested the blast media on some of our assets at the facility with very good results listed below;

  1. The overall cost of the project came in significantly lower than the original quote. Savings were approximately 20%
  2. Significantly less dust was produced minimizing the disturbance to other operations in the facility
  3. Less abrasive was used, resulting in less abrasive that needed to be handled, cleaned up and disposed of.
  4. Contractor was able to sand blast faster decreasing the duration of the project

Because of these results, we are continuing to utilize the Blast-One media on other painting projects that require sand blasting throughout our facility.

Dave Maag - PotashCorp - Ohio


Customer Testimonial on SpeedBlast Garnet Abrasive

Posted on 9/11/2013 at 7:30am

Gavin,

I wanted to take this opportunity to thank you and Blast-One for the excellent equipment, garnet and recommendations you made to us for our recent project together.  My men have commented on just how much faster and cleaner the abrasive was.  There was no down time due to moisture with your addition of the air dryer and the blast extremely simple and effective.  I would estimate that we were able to blast the existing tank lining probably 20% quicker than with other blast units.

We greatly appreciate your efforts and look forward to using you all for any future sandblasting needs we will have.

President - Peak Industrial Coatings & Linings, Inc.


Customer Testimonial on SpeedBlast Garnet Abrasive

Posted on 3/8/2012 at 10:56am

My foreman Bob said when he blasted the first time with the SpeedBlast Garnet, he thought the blast pot would never run out!!! I think we're on to something!!

Owner - Corrosion Control Contractor - Ohio


Customer Testimonial on SpeedBlast Garnet Abrasive

Posted on 3/29/2012 at 10:48am

I have been blasting for 25 years and I have NEVER used an abrasive as fast and versatile as Speedblast. If you aren't using it, you should be.

We were recently introduced to SpeedBlast Garnet and tried it in our portable pot to see how it would perform. After blasting just one piece of equipment (Caterpillar 950 Loader), we were convinced that Speedblast could live up to the claims made by Blast One.

This stuff is FAST. It is aggressive on everything we have thrown it at. Paint, rust and mill-scale are no match for Speedblast. We have since dumped the steel grit from our fixed blasting equipment and replaced it with Speedblast. In a little speed test I setup in our blast booth, I was able to clean new, 1/4 inch plate steel to SP5 white metal at a rate of 1 square foot every 6 seconds. Do the math.....that's 600 sq ft an hour with a #5 nozzle and 395 CFM of air.

Blast & Painting Manager - Large Fabrication Facility - Michigan


Customer Testimonial on SpeedBlast Garnet Abrasive

Posted on 5/8/2012 at 9:21am

We ordered 4 sacks of SpeedBlast Garnet for the Tank Lining job we did. The tank was approximately 8,200 sq. ft.

We performed a brush off blast and used approximately 6,000 lbs. of garnet. That is AWESOME!

I have enough SpeedBlast Garnet left to perform the next 2 tank lining jobs we are doing over the next 2 months.

We ordered a 40 cu. yard. dumpster and there is only a ribbon of used media in the bottom. Did not have to get a vac truck and saved the customer BIG $$$$. WOW!

Manager - Blasting & Painting Contractor - Ohio


Customer Testimonial on Customer Service

Posted on 11/12/2012 at 9:21am

Greg, in my years of supply chain, I have never seen anybody work at the level of customer service that you do! Thank you so much for your help, expertise and friendship. You have raised the bar of customer service for the balance of our vendor group. If you get eggs thrown at your house (by our current suppliers due to the raised expectations we have), it’s all my fault.

Purchasing Agent - Overhead Crane Manufacturer - Ohio